Microscope Lamps and Accessories
Electron Microscopy Sciences Tripod Polisher Pyrex Insert
The Pyrex Insert for Wedge Polishing (#50116-60): is used with the Screw Clamp and Slotted L-Bracket for mounting sample for the TEM - For use with Tripod Polisher Model 590.
Electron Microscopy Sciences EMS Platinum Aperture with 50 µm hole, 0.165 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 50 µm
O.D.: 4 mm
Thickness: 0.165 mm
Electron Microscopy Sciences EMS Platinum Aperture with 10 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 10 µm
O.D.: 6 mm
Thickness: 0.24 mm
Ted Pella Inc Lacey Carbon Type-A, 300 mesh, Copper approx. grid hole size: 63µm, 50/pk
A Lacey carbon film with a removable Formvar backing on the opposite side of the grid. When the Formvar is removed, by dipping in solvent, the Lacey carbon film remains. These films are stable under all EM operating conditions and for use where the presence of Formvar can not be tolerated. Pure Lacey Carbon is more delicate than those with Formvar backing and require more careful handling during specimen preparation. Holes are completely open.
Electron Microscopy Sciences EMS Platinum Aperture with 100 µm hole, 0.165 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 100 µm
O.D.: 4 mm
Thickness: 0.165 mm
Electron Microscopy Sciences EMS Gold Aperture with 30 µm hole, 3 mm O.D., 0.24 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 30 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Platinum Aperture with 30 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 30 µm
O.D.: 6 mm
Thickness: 0.24 mm